Remediation of water leaks

Water can damage a home through wind, storms, floods, plumbing repairs or misclassification. Whatever the reason, water damage should be mitigated immediately to avoid further damage to the house or family illness. Assess the problem, and come up with a remediation plan before starting work.

Repair the problem

Check the roof and attic for signs of leaking. Did ice buildup push away the roof gutter? It is the leak comes from around chimneys, pipes or chimney? Inspect ceilings on each floor for water spots. Look at all the areas that have the plumbing, including the bathroom, kitchen, water heater and washing machine. Are there signs of a leak in the plumbing? Inspect the floor and walls in the basement for signs of water coming through the foundation. Repair any problem of keeping water damage from below.

Leak Caught Immediate

The first two days after a water leak is critical. Some items can be dried and cleaned before mold or fungus growth can grow. Will have to be discarded before within 48 hours In general, drywall, ceiling tiles, paper, furniture and laminated particle board furniture. Portions of wet plaster panels should be removed, plus an additional 12 cm above the wet part. Jobs can be photocopied before being discarded. Only the smallest of leaks or vapor leaks can ceiling tiles, plywood and particle board items are dried, cleaned and repaired.

Carpet

Carpet saturated with sewage should be discarded immediately. Do not forget the carpet that extends under cabinets. Carpet is saturated with water might be able to be saved. Remove cabinets and furniture in the room. Use a wet / dry to remove as much water from the carpet as possible. Wash the carpet. Prepare a solution of bleach and water is one part bleach to 10 parts water. Try the solution in an inconspicuous area first. Another option is a biocide to kill bacteria. It will not kill the fungus. If this is not an option due to chemistry, you can hire a cleaning service to commercial steam to clean the carpet. Do not replace the furniture and cabinets until the carpet is completely dry. Fans and dehumidifiers can accelerate the drying process.

Electrical, Electronic and HVAC

Hard surfaces can be cleaned with a mild detergent and then rinse the bleach and water solution – used for carpets. Do not rinse the chlorine. You have to stay there to kill bacteria and fungi. On the surfaces of metal, just use bleach detergent because it corrodes metal. Do not use bleach in an unventilated area because the vapors emitted. If the electrical system was saturated, disconnect power from the damaged areas. An electrician must inspect all wiring, light fixtures and outlets. Any item with an electric motor and any electronics should be sent to a repair shop to be opened, dried and proof of damage. If the air conditioning system was part of the water damage, do not run the system until it can be cleaned professionally.